Owning a Jeep Wrangler is fun. It goes on adventures with you. But it needs care. One part of caring is changing its oil. After an oil change, the light still blinks. Let’s learn how to reset it.
Why the Oil Change Light Comes On
The oil change light is a helpful friend. It tells you when the oil needs changing. Oil keeps the engine happy. It reduces friction. Without it, the engine can get hot.
When you see the light, it means time for an oil change. Once changed, the light should go off. But sometimes, it stays on. Then you must reset it.
Steps to Reset the Oil Change Light
Resetting the light is not hard. Follow these steps.
- Start with Your Jeep Off: The car should be parked. Turn off the engine completely.
- Turn the Ignition to “On”: Do not start the engine. Turn the key to the “On” position. This is the position before starting the engine.
- Press the Gas Pedal: Press the gas pedal slowly. Do this three times. Make sure you press all the way down. Do this within ten seconds.
- Turn Off the Ignition: After pressing the pedal, turn the key back to “Off”.
- Start the Engine: Now start your Jeep. The oil change light should be off.
If the light is still on, repeat the steps. Sometimes it takes a couple of tries.
Credit: www.youtube.com
Why Resetting the Light is Important
Resetting the light is important. It helps keep track of oil changes. Ignoring it can cause confusion. You might forget when to change the oil next.
It is like a reminder. When it is reset, it starts counting again. This way, you know when to change oil next time.
When to Change Your Jeep’s Oil
Changing oil is vital. But when should you do it? Most Jeep Wranglers need oil changes every 3,000 to 5,000 miles. This can vary. Check your Jeep’s manual.
If you drive in tough conditions, change it sooner. Dust, dirt, and rough roads can affect oil. Fresh oil ensures the engine runs smoothly.
What If the Light Stays On?
Sometimes the light stays on. Even after resetting. Don’t worry.
First, check if you followed the steps correctly. Try resetting it again. If it still stays on, there might be another issue.
You may need to visit a mechanic. They can check if there is a problem. It could be a sensor or electrical issue.
Credit: jeepoffroadadventures.com
Basic Oil Change Tips
Here are some quick tips for oil changes. These can help you keep your Jeep running well.
- Always use the right oil type for your Jeep.
- Check the oil level regularly.
- Keep an eye on the oil color. Dark oil means it’s time to change.
- Don’t forget to change the oil filter.
- Dispose of old oil properly.
Frequently Asked Questions
How Do I Reset The Oil Change Light On A Jeep Wrangler?
Turn the ignition on. Press the gas pedal three times. Done.
What Happens If I Don’t Reset The Oil Change Light?
The light will stay on. You might miss future alerts.
Can I Reset The Oil Light Without Visiting A Mechanic?
Yes, you can reset it yourself using simple steps.
Why Does The Oil Change Light Turn On?
It signals that your Jeep needs an oil change.
Conclusion
Resetting the oil change light is easy. It is a simple task. But it is important for your Jeep. It helps keep track of oil changes.
Remember to change oil regularly. Follow the steps to reset the light. If you face issues, consult a mechanic.
Enjoy your Jeep. Take it on adventures. But remember to take care of it too.
Leave a Reply