Flat towing a Jeep Wrangler is a useful skill. It’s called “flat” because all four wheels are on the ground. This method is handy for RV travelers. It allows you to bring your Jeep along.
What is Flat Towing?
Flat towing is also known as “dinghy towing.” It means pulling a car with all wheels on the ground. You need a tow bar to connect the vehicles. This method is different from using a trailer.
Why Flat Tow a Jeep Wrangler?
The Jeep Wrangler is a great car to flat tow. It’s light and easy to pull. Many RV owners prefer it. You can explore more places with your Jeep.
Can You Flat Tow Any Jeep?
Not all Jeeps can be flat towed. Some models have different transmissions. You need to check your Jeep’s manual. Make sure your model is okay for flat towing.
Steps to Flat Tow a Jeep Wrangler with Automatic Transmission
Step 1: Check The Jeep Manual
Always start with your Jeep’s manual. It has important information. It tells you if your Jeep can be flat towed. Follow the guidelines it provides.
Step 2: Gather The Needed Equipment
You need some equipment to flat tow. Here’s what you need:
- Tow bar: This connects your Jeep to the towing vehicle.
- Base plate: Installed on the Jeep, it attaches to the tow bar.
- Safety cables: These are for extra security.
- Wiring kit: It connects the Jeep’s lights to the towing vehicle.
Step 3: Install The Tow Bar And Base Plate
Attach the base plate to your Jeep’s frame. The tow bar connects to this base plate. Make sure everything is tight and secure.
Step 4: Prepare The Jeep For Towing
Follow these sub-steps:
- Start the Jeep and let it idle.
- Put the transmission in “Neutral.”
- Move the transfer case to “Neutral.”
- Turn off the engine.
Step 5: Connect Safety Cables And Wiring Kit
Attach safety cables between the two vehicles. Connect the wiring kit to the Jeep’s lights. Check that the lights work properly.
Step 6: Double-check Everything
Walk around both vehicles. Check all connections. Make sure the tow bar, cables, and lights are secure. Safety is important!
Important Tips for Flat Towing
Here are some tips to remember:
- Drive at a safe speed.
- Check your mirrors often.
- Practice turns and stops in a safe area first.
- Always follow your Jeep’s manual.
Credit: www.youtube.com
Benefits of Flat Towing a Jeep Wrangler
Flat towing a Jeep Wrangler has many benefits:
- Convenience: Easy to hitch and unhitch.
- Exploration: Visit places where big vehicles can’t go.
- Fuel Efficiency: Save on fuel compared to trailers.
Common Mistakes to Avoid
Be careful to avoid these mistakes:
- Not reading the Jeep manual.
- Incorrectly setting the transfer case.
- Forgetting to check lights and connections.
Credit: www.quadratec.com
Frequently Asked Questions
Can You Flat Tow A Jeep Wrangler With Automatic Transmission?
Yes, it can be flat towed. Use the right equipment and settings.
What Is The Correct Procedure For Flat Towing?
Put the transfer case in neutral. Attach tow bar. Check all connections.
Is Flat Towing Safe For The Jeep Wrangler?
Yes, it’s safe when done correctly. Follow manufacturer guidelines to avoid damage.
Do I Need Special Equipment For Flat Towing?
Yes, you’ll need a tow bar and safety cables. Check compatibility with your Jeep model.
Conclusion
Flat towing a Jeep Wrangler is simple when done right. Follow each step carefully. Remember to always prioritize safety. Enjoy your travels with your Jeep!
Leave a Reply