How to Flat Tow a Jeep Wrangler Automatic Transmission: Expert Tips

Published:

Updated:

Author:

Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

How to Flat Tow a Jeep Wrangler Automatic Transmission

Flat towing a Jeep Wrangler is a useful skill. It’s called “flat” because all four wheels are on the ground. This method is handy for RV travelers. It allows you to bring your Jeep along.

What is Flat Towing?

Flat towing is also known as “dinghy towing.” It means pulling a car with all wheels on the ground. You need a tow bar to connect the vehicles. This method is different from using a trailer.

Why Flat Tow a Jeep Wrangler?

The Jeep Wrangler is a great car to flat tow. It’s light and easy to pull. Many RV owners prefer it. You can explore more places with your Jeep.

Can You Flat Tow Any Jeep?

Not all Jeeps can be flat towed. Some models have different transmissions. You need to check your Jeep’s manual. Make sure your model is okay for flat towing.


Steps to Flat Tow a Jeep Wrangler with Automatic Transmission

Step 1: Check The Jeep Manual

Always start with your Jeep’s manual. It has important information. It tells you if your Jeep can be flat towed. Follow the guidelines it provides.

Step 2: Gather The Needed Equipment

You need some equipment to flat tow. Here’s what you need:

  • Tow bar: This connects your Jeep to the towing vehicle.
  • Base plate: Installed on the Jeep, it attaches to the tow bar.
  • Safety cables: These are for extra security.
  • Wiring kit: It connects the Jeep’s lights to the towing vehicle.

Step 3: Install The Tow Bar And Base Plate

Attach the base plate to your Jeep’s frame. The tow bar connects to this base plate. Make sure everything is tight and secure.

Step 4: Prepare The Jeep For Towing

Follow these sub-steps:

  • Start the Jeep and let it idle.
  • Put the transmission in “Neutral.”
  • Move the transfer case to “Neutral.”
  • Turn off the engine.

Step 5: Connect Safety Cables And Wiring Kit

Attach safety cables between the two vehicles. Connect the wiring kit to the Jeep’s lights. Check that the lights work properly.

Step 6: Double-check Everything

Walk around both vehicles. Check all connections. Make sure the tow bar, cables, and lights are secure. Safety is important!

Important Tips for Flat Towing

Here are some tips to remember:

  • Drive at a safe speed.
  • Check your mirrors often.
  • Practice turns and stops in a safe area first.
  • Always follow your Jeep’s manual.
How to Flat Tow a Jeep Wrangler Automatic Transmission: Expert Tips

Credit: www.youtube.com

Benefits of Flat Towing a Jeep Wrangler

Flat towing a Jeep Wrangler has many benefits:

  • Convenience: Easy to hitch and unhitch.
  • Exploration: Visit places where big vehicles can’t go.
  • Fuel Efficiency: Save on fuel compared to trailers.

Common Mistakes to Avoid

Be careful to avoid these mistakes:

  • Not reading the Jeep manual.
  • Incorrectly setting the transfer case.
  • Forgetting to check lights and connections.
How to Flat Tow a Jeep Wrangler Automatic Transmission: Expert Tips

Credit: www.quadratec.com

Frequently Asked Questions

Can You Flat Tow A Jeep Wrangler With Automatic Transmission?

Yes, it can be flat towed. Use the right equipment and settings.

What Is The Correct Procedure For Flat Towing?

Put the transfer case in neutral. Attach tow bar. Check all connections.

Is Flat Towing Safe For The Jeep Wrangler?

Yes, it’s safe when done correctly. Follow manufacturer guidelines to avoid damage.

Do I Need Special Equipment For Flat Towing?

Yes, you’ll need a tow bar and safety cables. Check compatibility with your Jeep model.

Conclusion

Flat towing a Jeep Wrangler is simple when done right. Follow each step carefully. Remember to always prioritize safety. Enjoy your travels with your Jeep!

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • How to Safely Jack Up a Jeep Wrangler: Expert Tips

    How to Safely Jack Up a Jeep Wrangler: Expert Tips

    To jack up a Jeep Wrangler, find the jack points underneath the vehicle and use a hydraulic jack to lift it. If you own a Jeep Wrangler and want to perform maintenance or modifications that require lifting the car, such as changing a tire or installing larger tires, you will need to know how to…

    Read more

  • How Much to Replace Windshield on Jeep Wrangler: Ultimate Cost Guide

    How Much to Replace Windshield on Jeep Wrangler: Ultimate Cost Guide

    Replacing the windshield on a Jeep Wrangler can cost anywhere from $200 to $500, depending on the type of glass and additional features desired. Many Jeep Wrangler owners find themselves in need of windshield replacement due to various reasons, such as cracks, chips, or damage caused by accidents. If you find yourself in this unfortunate…

    Read more

  • Ultimate Guide: How to Order a Jeep Wrangler from Factory Today

    Ultimate Guide: How to Order a Jeep Wrangler from Factory Today

    To order a Jeep Wrangler from the factory, visit the official Jeep website and locate the option to build and customize your Wrangler. From there, select your preferred trim, colors, features, and accessories, and follow the prompts to complete your order. Once submitted, you will be contacted by a dealer to finalize the details and…

    Read more