Owning a Jeep Wrangler is fun. It needs care too. One thing you do often is change the oil. After changing the oil, you reset the oil change light.
Why Reset the Oil Change Light?
The oil change light tells you when to change the oil. After changing the oil, the light stays on. You need to reset it. This helps you know when the next oil change is due.
What You Need
Before you start, make sure you have:
- Your Jeep Wrangler
- The keys to the Jeep
That’s all you need. Let’s get started.
Steps to Reset the Oil Change Light
Follow these steps carefully. It’s easy. Just take your time.
Step 1: Get In The Jeep
Sit in the driver’s seat. You need to be inside the Jeep. Make sure the doors are closed.
Step 2: Turn The Ignition Key
Put the key in the ignition. Turn it to the “On” position. Do not start the engine. Just turn it to “On”.
Step 3: Press The Gas Pedal
Press the gas pedal all the way down. Do it slowly. Hold it for one second.
Step 4: Release The Gas Pedal
Let go of the gas pedal. Wait for a moment.
Step 5: Repeat The Gas Pedal Press
Press the gas pedal all the way down again. Hold it for one second. Release the pedal.
Step 6: Press The Gas Pedal Again
Press it down one more time. Hold for a second. Release it.
Step 7: Turn Off The Ignition
Turn the key back to the “Off” position. Take out the key.
Step 8: Check The Oil Change Light
Turn the key to “On” again. Look at the oil change light. It should be off now.
Good job! You have reset the oil change light. Now your Jeep Wrangler is ready to go.
Why is Regular Oil Change Important?
Oil keeps the engine parts moving smoothly. Old oil can damage the engine. Regular oil changes help keep the engine healthy. It also helps the Jeep run better.
Credit: www.youtube.com
Credit: jeepoffroadadventures.com
When to Change the Oil
Check the owner’s manual. It tells you how often to change the oil. Usually, every 3,000 to 5,000 miles. Check the oil level often too.
Where to Get an Oil Change
You can change the oil yourself. Or, you can go to a mechanic. Many places do oil changes. Choose one that is good and close to you.
Frequently Asked Questions
How Do You Reset The Oil Change Light On A Jeep Wrangler?
Locate the ignition switch. Turn it to the “ON” position without starting the engine. Fully press the gas pedal three times within 10 seconds. Turn the ignition off and start the engine to ensure the light has reset.
Why Does The Oil Change Light Turn On?
The oil change light signals it’s time for an oil change. It helps maintain engine health by reminding you to replace old oil.
Can I Reset The Oil Change Light Myself?
Yes, you can reset it manually. Follow simple steps using the gas pedal and ignition switch.
Is It Safe To Drive With The Oil Change Light On?
Driving briefly is okay. Schedule an oil change soon to avoid engine damage and maintain performance.
Conclusion
Resetting the oil change light is simple. Now you know how to do it. Remember to change the oil on time. This keeps your Jeep Wrangler in good shape. Enjoy your ride!
Leave a Reply